Table of Contents
Advertisement
Related commands
authorization command
command accounting
databits
Use
databits
Use
undo databits
Syntax
databits { 5 | 6 | 7 | 8 }
undo databits
Default
Eight data bits are used for a character.
Views
User line view
Predefined user roles
network-admin
Parameters
: Uses five data bits for a character.
5
: Uses six data bits for a character.
6
: Uses seven data bits for a character.
7
: Uses eight data bits for a character.
8
Usage guidelines
This command is not supported in VTY line class view.
Only modem dial-in supports keywords
This setting must be the same as the setting on the configuration terminal.
Examples
# Configure AUX line 0 to use seven data bits for a character.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] databits 7
display | original-encoding
Use
display | original-encoding
encoding to the specified encoding.
Syntax
display command | original-encoding { gb18030 | utf-8 }
Default
The original encoding is the system encoding.
(User Access and Authentication Command Reference)
to specify the number of data bits for a character.
to restore the default.
and
.
5
6
to convert the output from a command from the original
10
Advertisement
Chapters
Table of Contents
