Reset Version-Update-Record - H3C S6550X-HI Series Command Reference Manual

Predefined user roles
network-admin
Usage guidelines
To ensure a successful ISSU and make sure that the system can start up and operate correctly
after an ISSU, execute this command to verify the following items:
•
Integrity—Verify that the boot, system, and feature images are integral.
•
Consistency—Verify that the same active images are running across the entire system.
•
Software commit status—Verify that the active images are committed as needed.
If a software image fails the verification, perform the following tasks to resolve the problem:
•
To ensure software integrity, download and install the software images again.
•
To guarantee software image consistency or change software commit status, use the
install activate
appropriate.
Examples
# Verify the software change confirmation status and software image integrity and consistency.
<Sysname> install verify
Active packages on slot 1 are the reference packages.
Packages will be compared with the reference packages.
This operation will take several minutes, please wait...
Verifying packages on slot 1:
Start to check active package completeness.
Verifying the file flash:/boot-t0001015.bin on slot 1.....................Done.
flash:/boot-t0001015.bin verification successful.
Verifying the file flash:/system-t0001015.bin on slot 1.....................Done.
flash:/system-t0001015.bin verification successful.
Start to check active package consistency.
Active packages are consistent with committed packages on their own board.
Active packages are consistent with the reference packages.
Verifying packages on slot 2:
Start to check active package completeness.
Verifying the file flash:/boot-t0001015.bin on slot 2.....................Done.
flash:/boot-t0001015.bin verification successful.
Verifying the file flash:/system-t0001015.bin on slot 2.....................Done.
flash:/system-t0001015.bin verification successful.
Start to check active package consistency.
Active packages are consistent with committed packages on their own board.
Active packages are consistent with the reference packages.
Verification is done.

reset version-update-record

Use
reset version-update-record
Syntax
reset version-update-record
,
install deactivate
to clear startup software image upgrade records.
23
, and
install commit
commands as