Time At - H3C S6550X-HI Series Command Reference Manual

Usage guidelines
A device name identifies a device in a network and is used in CLI view prompts. For example, if the
device name is Sysname, the user view prompt is <Sysname>.
Examples
# Set the name of the device to MyDevice.
<Sysname> system-view
[Sysname] sysname MyDevice
[MyDevice]

time at

Use
time at
Use
undo time
Syntax
time at time date
undo time
Default
No execution time or date is specified for a non-periodic schedule.
Views
Schedule view
Predefined user roles
network-admin
Parameters
: Specifies the schedule execution time in the hh:mm format. The value range for hh is 0 to 23.
time
The value range for mm is 0 to 59.
: Specifies the schedule execution date in the MM/DD/YYYY or YYYY/MM/DD format. The
date
value range for YYYY is 2000 to 2035. The value range for MM is 1 to 12. The value range for DD
varies by month.
Usage guidelines
The specified time (date plus time) must be later than the current system time.
The
time at
overwrite one another. The most recently executed command takes effect.
Examples
# Configure the device to execute schedule saveconfig at 01:01 a.m. on May 11, 2019.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time at 1:1 2019/05/11
Related commands
scheduler schedule
time once
time repeating
to specify an execution date and time for a non-periodic schedule.
to delete the execution date and time configuration for a non-periodic schedule.
command, the
time once
command, and the
20
command
time repeating