Login Management Commands; Activation-Key - H3C S6550X-HI Series Command Reference Manual

Login management commands

Some login management commands are available in both user line view and user line class view. For
these commands, the device uses the following rules to determine the settings to be activated:
•
A setting in user line view applies only to the user line. A setting in user line class view applies to
all user lines of the class.
•
A non-default setting in either view takes precedence over a default setting in the other view. A
non-default setting in user line view takes precedence over a non-default setting in user line
class view.
•
A setting in user line class view takes effect on login sessions that are established after the
setting is configured.

activation-key

Use
activation-key
terminal session.
Use
undo activation-key
Syntax
activation-key key-string
undo activation-key
Default
The terminal session activation key is Enter.
Views
User line view
User line class view
Predefined user roles
network-admin
Parameters
key-string
value in the range of 0 to 127. For example, if you execute
Ctrl+A. If you execute
code values of individual characters, see the standard ASCII code chart. For information about
ASCII code values of combined keys that use the Ctrl key, see
Usage guidelines
This command is not supported in VTY line view or VTY line class view.
This command takes effect immediately.
This command is available in both user line view and user line class view. A non-default setting in
either view takes precedence over a default setting in the other view. A non-default setting in user
line view takes precedence over a non-default setting in user line class view.
You can use only the specified terminal session activation key to start a terminal session. To display
the current terminal session activation key, use the
include activation-key
to set the terminal session activation key. Pressing this shortcut key starts a
to restore the default.
: Specifies a shortcut key. It can be a character (case sensitive), or an ASCII code
activation-key a
command.
activation-key 1
, the shortcut key is a. For information about ASCII
Table
display current-configuration |
1
, the shortcut key is
1.