Ip Fast-Forwarding Aging-Time - H3C S6550X-HI Series Command Reference Manual

Table 2 Command output
Field
SIP
SPort
DIP
DPort
Pro
Input_If
ID
Related commands
reset ip fast-forwarding cache

ip fast-forwarding aging-time

Use
ip fast-forwarding aging-time
Use
undo ip fast-forwarding aging-time
Syntax
ip fast-forwarding aging-time aging-time
undo ip fast-forwarding aging-time
Default
The aging time is 30 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
aging-time
Examples
# Set the aging time to 20 seconds for fast forwarding entries.
<Sysname> system-view
[Sysname] ip fast-forwarding aging-time 20
Related commands
display ip fast-forwarding aging-time
Description
Source IP address.
Source port number.
Destination IP address.
Destination port number.
Protocol number.
Input interface type and number.
If no interface is involved in fast forwarding, this field displays N/A.
If the input interface does not exist, this field displays a hyphen (-).
Fragment ID.
: Specifies the aging time in the range of 10 to 300 seconds.
to configure the aging time for fast forwarding entries.
to restore the default.
3