Dhcp Relay Client-Information Record; Dhcp Relay Client-Information Refresh - H3C S6550X-HI Series Command Reference Manual

Usage guidelines
This command takes effect only after you execute the
command.
Examples
# Set the aging time to 60 seconds for MAC address check entries on the DHCP relay agent.
<Sysname> system-view
[Sysname] dhcp relay check mac-address aging-time 60

dhcp relay client-information record

Use
dhcp relay client-information record
entries.
Use
undo dhcp relay client-information record
Syntax
dhcp relay client-information record
undo dhcp relay client-information record
Default
The DHCP relay agent does not record client information in relay entries.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Client information is recorded only when the DHCP relay agent is configured on the gateway of
DHCP clients. A relay entry contains information about a client such as the client's IP and MAC
addresses.
Disabling the recording of client information deletes all recorded relay entries.
Examples
# Enable the recording of relay entries on the relay agent.
<Sysname> system-view
[Sysname] dhcp relay client-information record
Related commands

dhcp relay client-information refresh

dhcp relay client-information refresh enable
dhcp relay client-information refresh
Use
dhcp relay client-information refresh
agent refreshes relay entries.
Use
undo dhcp relay client-information refresh
Syntax
dhcp relay client-information refresh
dhcp relay check mac-address
to enable recording client information in relay
to disable the feature.
to set the interval at which the DHCP relay
to restore the default.
[ |
auto
62
interval interval
]