Juniper EX9214 Hardware Manual page 167

Table 57: Mounting Hardware Hole Locations in an Open-Frame Rack or Cabinet
Holes
1
Ensure that you have the following parts and tools available:
• Phillips (+) screwdriver, number 2
• Screws to secure the shelf to the rack or cabinet
To install the mounting shelf on the front rails of a four-post rack or cabinet, or on the rails of an open-
frame rack:
1. If needed, install cage nuts on the rear of each rack rail in the holes specified in
155.
2. On the rear of each rack rail, partially insert a mounting screw into the lowest hole specified in
57 on page 155.
3. Hang the shelf over the mounting screws by using the keyhole slots located near the top of the shelf
flanges.
Distance Above U Divisions
0.256 in. (0.6 cm) 0.14
(Continued)
Shelf
Table 57 on page
Table
156