Juniper EX9214 Hardware Manual page 181

Table 58: Parts Required for Connecting an EX Series Switch to Earth Ground
Switch Earthing
Terminal
Location
EX8216 Two earthing
terminals:
•
Left side
of the
chassis
•
Rear
panel of
the
chassis
NOTE: You
must use
only one of
the two
protective
earthing
terminals.
EX9204, Rear panel of
EX9208, the chassis
and
EX9214
Grounding Grounding Lug
Cable Specifications
Requirements
2 AWG Panduit LCD2-14A-
(33.6 mm²), Q or equivalent
minimum 90° C —provided
wire, or as
permitted by
the local code
One 6 AWG Thomas& Betts
(13.3 mm²), LCN6-14 or
minimum 90° C equivalent—
wire, or one provided
that complies
with the local
code
(Continued)
Screws and Additional
Washers Information
•
Two ¼ -20 x
0.5 in.
screws with
#¼" split-
washer
—provided
•
Two #¼" flat
washers—
provided
See Grounding
•
Two ¼ -20
Cable and Lug
x 0.5 in.
Specifications for
screws with
EX9200
#¼" split-
washer—
provided
•
Two #¼" flat
washers—
provided
170
Switches.