Juniper EX9214 Hardware Manual page 210

domain-name ;
domain-name
root-authentication {
authentication-method ( password | public-key );
}
name-server {
address ;
}
}
interfaces {
fxp0 {
unit 0 {
family inet {
address
}
}
}
}
15. Commit the configuration to activate it on the switch.
[edit]
root@# commit
16. (Optional) Configure additional properties by adding the necessary configuration statements. Then
commit the changes to activate them on the switch.
[edit]
root@switch# commit
17. When you have finished configuring the switch, exit configuration mode.
[edit]
root@switch# exit
root@switch>
NOTE: To reinstall Junos OS, you boot the switch from the removable media. Do not insert the
removable media during normal operations. The switch does not operate normally when it is
booted from the removable media.
address/prefix-length ;
199