Juniper EX9214 Hardware Manual page 252

XF ASIC A
XF ASIC B
NOTE: The output is of an EX9208 switch. The output is similar for all EX9200 switches.
Figure 74 on page 241 shows installing an SF module in an EX9208 switch. The procedure is the same
for all EX9200 switches.
Figure 74: Installing an SF Module in an EX9200 Switch
NOTE: If you have a Juniper J-Care service contract, register any addition, change, or upgrade of
hardware components at
Failure to do so can result in significant delays if you need replacement parts. This note does not
apply if you replace existing components with the same type of component.
1000 mV 1002 mV 11281 mA
1000 mV 997 mV 11015 mA
https:/ /www.juniper.net/customers/support/tools/updateinstallbase/
11303 mW
10981 mW
241
.