Juniper EX9214 Hardware Manual page 179

Table 58: Parts Required for Connecting an EX Series Switch to Earth Ground
Switch Earthing
Terminal
Location
EX4300 Rear panel of
switches the chassis
except
EX4300-4
8MP and
EX4300-4
8MP-S
switches
EX4300-4 Rear panel of
8MP and the chassis
EX4300-4
8MP-S
switches
EX4500 Left side of
and the chassis
EX4550
Grounding Grounding Lug
Cable Specifications
Requirements
14-10 AWG Panduit
STR (2.5-6 LCD10-10A-L or
mm²), minimum equivalent—
90° C wire, or not provided
as permitted by
the local code
14-10 AWG Panduit
STR (2.5-6 LCD10-14B-L,
mm²), minimum LCC10-BW-L, or
90° C wire, or equivalent—
as permitted by not provided
the local code
14 AWG Panduit
(2 mm²), LCC10-14BWL or
minimum 90° C equivalent—
wire, or as not provided
permitted by
the local code
(Continued)
Screws and Additional
Washers Information
•
Two 10-32
x .25 in.
screws with
#10 split-
lock washer
—
not provided
•
Two #10 flat
washers—
not provided
•
Two 10-32
x .25 in.
screws with
#10 split-
lock washer
—
not provided
•
Two #10 flat
washers—
not provided
See "Special
•
Two 10-32
Instructions to
x .25 in.
Follow Before
screws with
Connecting Earth
#10 split-
Ground to an EX
lock washer
Series Switch" on
—
page 171.
not provided
•
Two #10 flat
washers—
not provided
168