Juniper EX9214 Hardware Manual page 115

Table 36: EX9200-40F Line Card
Model
EX9200-40F
See Figure 37 on page 104.
Figure 37: EX9200-40F Line Card
Ejector lever
1
—
Line card LED
2
—
3 MIC LED
—
You can use the
show version
the switch.
Line Card Components
The EX9200-40F line card has:
• 40 1-Gigabit Ethernet ports, each of which can house SFP transceivers
• 40 dust covers for the ports (shipped in an accessory bag)
• Line card LED—An LED labeled OK/FAIL, which indicates the status of the line card. See
LED in an EX9200 Switch
• MIC LED—An LED labeled OK/FAIL on each MIC, which indicates the status of the MIC. See
Modular Interface Card LED in an EX9200 Switch
• LEDs for the ports—One LED on each port, the Link/Activity LED, which indicates the link status and
activity on the port. See
Description
A line card with 40 1-Gigabit Ethernet
ports, each of which can house 1-
gigabit small form-factor pluggable
(SFP) transceivers
command to see the version of Junos OS for EX Series switches loaded on
.
Network Port LEDs on Line Cards in an EX9200 Switch
Junos OS Release Required
12.3R2 or later
LEDs for the ports
4
—
1-Gigabit Ethernet ports
5
—
.
Line Card
.
104