Juniper EX9214 Hardware Manual page 117

See Figure 38 on page 106.
Figure 38: EX9200-40F-M Line Card
1 Ejector lever
—
2 Line card LED
—
MIC LED
3
—
You can use the
show version
the switch.
Line Card Components
The EX9200-40F-M line card has:
• 40 1-Gigabit Ethernet MACsec-capable ports, each of which can house SFP transceivers. These ports
support 1000BASE-T, 10/100/1000BASE-T, 100BASE-FX, 1000BASE-EX, 1000BASE-LH,
1000BASE-LX, and 1000BASE-SX transceivers.
• Line card LED—An LED labeled OK/FAIL, which indicates the status of the line card. See
LED in an EX9200 Switch
• MIC LED—An LED labeled OK/FAIL on each MIC, which indicates the status of the MIC. See
Modular Interface Card LED in an EX9200 Switch
• LEDs for the ports—One LED on each port, the Link/Activity LED, which indicates the link status and
activity on the port. See
The ports labeled 0/0 through 0/9 form pic 0. The ports labeled 1/0 through 1/9 form pic 1. The ports
labeled 2/0 through 2/9 form pic 2. The ports labeled 3/0 through 3/9 form pic 3.
command to see the version of Junos OS for EX Series switches loaded on
.
Network Port LEDs on Line Cards in an EX9200 Switch
4 LEDs for the ports
—
5 1-Gigabit Ethernet ports with MACsec
—
capability
.
Line Card
.
106