Juniper EX9214 Hardware Manual page 67

Table 19: DC Power Supply LEDs in EX9214 Switches
Feed Description
Mode
One- The power input to the INP-0 DC
Feed power inlet located on the power
supply is connected and the power
input to the INP-1 DC power inlet
located on the power supply is not
connected; the input is within the
acceptable range, and the INP-0 is
functioning normally and providing
power to the switch chassis.
The power input to the INP-1 DC
power inlet located on the power
supply is connected and the power
input to the INP-0 DC power inlet
located on the power supply is not
connected; the input is within the
acceptable range, and the INP-1 is
functioning normally and providing
power to the switch chassis.
The power inputs to the INP-0 and
INP-1 DC power inlets located on
the power supply are connected; the
input is within the acceptable range,
and the INP-0 is functioning normally
and providing power to the switch
chassis.
LEDs
INP0 OK INP1 OK
Green Off
Off Green
Green Green
DC OK PS FAIL
Green Off
Green Off
Green Off
56