Juniper EX9214 Hardware Manual page 26

Table 4: CLI Equivalents of Terms Used in Documentation for EX9214 Switches
Hardware Description (CLI)
Item (CLI)
Chassis EX9214
Midplane EX9214-BP3
FPM Board Front Panel Display
n )
PEM ( One of the
following:
•
PS 4.1 kW;
200-240 V AC in
•
DC 2.4 kW
Power Entry
Module
Routing One of the
n )
Engine ( following:
•
RE–S–EX9200
–1800X4
•
RE–S–EX9200
–2X00x6
Value (CLI)
–
–
–
n is a value in the range
0-3. The value
corresponds to the
power supply slot
number.
n is a value in the range
0-1.
In a base configuration,
only one entry appears.
In a redundant
configuration, two
entries appear–one for
each Routing Engine
module (RE module)
installed in the chassis.
Item in Additional
Documentation Information
Switch chassis "Chassis Physical
Specifications of an
EX9214 Switch" on
page 20
Switch midplane "Midplane in an
EX9200 Switch" on
page 36
Craft interface "Craft Interface in an
EX9200 Switch" on
page 29
AC or DC power
•
supply
•
Routing Engine
RE module
Module in an EX9200
Switch
"AC Power Supply
in an EX9214
Switch" on page
43
"DC Power Supply
in an EX9214
Switch" on page
52
15