Juniper EX9214 Hardware Manual page 180

Table 58: Parts Required for Connecting an EX Series Switch to Earth Ground
Switch Earthing
Terminal
Location
EX6210 Rear panel of
the chassis
(on lower left
side)
EX8208 Left side of
the chassis
Grounding Grounding Lug
Cable Specifications
Requirements
The grounding Panduit LCD2-14A-
cable must be Q or equivalent
the same gauge —provided
as the power
feed cables and
as permitted by
the local code.
6 AWG Panduit LCD2-14A-
(13.3 mm²), Q or equivalent
minimum 90° C —provided
wire, or as
permitted by
the local code
(Continued)
Screws and Additional
Washers Information
•
Two ¼ -20
x 0.5 in.
screws with
#¼" split-
washer
—provided
•
Two #¼" flat
washers—
provided
•
Two ¼ -20
x 0.5 in.
screws with
#¼" split-
washer
—provided
•
Two #¼" flat
washers—
provided
169