Juniper EX9214 Hardware Manual page 62

Table 16: AC Power Supply LEDs in EX9214 Switches
Feed Description
Mode
Two- The power input to the AC appliance
Feed inlet located on the chassis above the
power supply is connected and the
power input to the AC appliance inlet
on the power supply faceplate is not
connected; the input is within the
acceptable range, but the power
supply is not functioning normally
and is not providing power to the
switch chassis.
The power input to the AC appliance
inlet on the power supply faceplate is
connected and the power input to
the AC appliance inlet located on the
chassis above the power supply is
not connected; the input is within
the acceptable range, but the power
supply is not functioning normally
and is not providing power to the
switch chassis.
The power input to the AC appliance
inlet located on the chassis above the
power supply and the power input to
the AC appliance inlet on the power
supply faceplate are connected; the
inputs are within the acceptable
ranges and the power supply is
functioning normally and providing
power to the switch chassis.
(Continued)
LEDs
AC-1 OK AC-2 OK
Green Off
Off Green
Green Green
DC OK PS FAIL
Off Red
Off Red
Green Off
51