Juniper EX9214 Hardware Manual page 121

Table 40: Network Port LEDs on Line Cards in an EX9200 Switch—Link/Activity LED
LED
Link/Activity
The Status LED in 10/100/1000BASE-T RJ-45 Ethernet network port indicates the status of one of the
three port parameters—administrative status, speed, and duplex mode status.
Table 41 on page 110 describes the Status LED.
Table 41: Network Port LEDs on Line Cards in an EX9200 Switch—Status LED
LED
Status
Color
Green
Yellow (applicable only for
the 40-Gigabit Ethernet
ports on EX9200-6QS
line card)
LCD Indicator
LED: ADM
LED: SPD
State and Description
•
On steadily—The port and the link are active, but
there is no link activity.
•
Blinking—The port and the link are active, and there
is link activity.
•
Off—The port is not active.
On steadily—The link is disabled.
State, Color, and Description
Indicates the administrative status (enabled or
disabled). The status indicators are:
•
Green—Administrative status enabled.
•
Yellow—The port is down.
•
Unlit—Administrative status disabled.
Indicates the speed. The speed indicators are different
in the line cards.
•
Unlit—10 Mbps
•
Green—Blinking—100 Mbps
•
Green—On steadily—1000 Mbps
110