Juniper EX9214 Hardware Manual page 99

Line Card Models
Table 30 on page 88 shows the model number, description of the line card model, and the Junos OS
release in which the line card was first supported.
Table 30: EX9200-6QS Line Card
Model Description
EX9200-6QS A line card with six 40-Gigabit Ethernet
ports, each of which can house 40-gigabit
quad small form-factor pluggable plus
(QSFP+) transceivers; and 24 10-Gigabit
Ethernet ports, each of which can house
10-gigabit small form-factor pluggable
(SFP+) transceivers
See Figure 28 on page 88.
Figure 28: EX9200-6QS Line Card
1 Ejector lever
—
Line card LED
2
—
LEDs for the 10-Gigabit Ethernet ports
3
—
You can use the
show version
the switch.
Line Card Components
The EX9200-6QS line card has:
command to see the version of Junos OS for EX Series switches loaded on
Junos OS Release Required
14.2R1 or later
CAUTION: Junos OS Release 14.2R1 supports
the EX9200-6QS line card except for one
specific configuration. See the
14.2R2 Release Notes
PR1068396 to determine whether that
configuration applies to your switch and which
release to use if the configuration does apply.
4 10-Gigabit Ethernet ports
—
LEDs for the 40-Gigabit Ethernet ports
5
—
40-Gigabit Ethernet ports
6
—
Junos OS
for Known Issue
88