Juniper EX9214 Hardware Manual page 119

Figure 39 on page 108 shows the components of an EX9200-40XS line card.
Figure 39: EX9200-40XS Line Card
1 Ejector lever
—
Line card LEDs
2
—
You can use the
show version
the switch.
Line Card Components
The EX9200-40XS line card has:
• 40 10-Gigabit Ethernet MACsec-capable ports, each of which can house SFP+ transceivers. These
ports support 10GBASE-SR and 10GBASE-LR transceivers.
• 40 dust covers for the ports.
• Line card LED—An LED labeled OK/FAIL, which indicates the status of the line card. See
LED in an EX9200 Switch
• Network port LED—One LED on each network port, the Link/Activity LED, which indicates the link
status and activity on the port. See
The ports are divided into two port groups of 20 ports each. The 10-Gigabit Ethernet ports labeled 0/0
through 0/19 form one port group. The 10-Gigabit Ethernet ports labeled 1/0 through 1/19 form the
other port group. The ports in each group share 200 gigabits of bandwidth. Thus, you can transmit up to
200 gigabits of traffic through each port group, without packet drop.
command to see the version of Junos OS for EX Series switches loaded on
.
Network Port LEDs on Line Cards in an EX9200 Switch
3 LEDs for the 10-Gigabit Ethernet ports
—
10-Gigabit Ethernet ports with MACsec
4
—
capability
108
Line Card
.