Juniper EX9214 Hardware Manual page 104

transceivers. An LED labeled OK/FAIL on the MIC indicates the status of the MIC. See
Interface Card LED in an EX9200 Switch
ports. See Figure 31 on page
Figure 31: EX9200-20F-MIC
LEDs for the ports
1
—
1-Gigabit Ethernet ports
2
—
• EX9200-40T-MIC, which has 40 RJ-45 ports, which can accept RJ-45 connectors. The ports are
divided into three port groups. The ports labeled 0/1 through 1/5 and 0/0 through 1/4 form port
group pic0, the ports labeled 1/7 through 2/3 and 1/6 through 2/2 form port group pic1, and the
ports labeled 2/5 through 3/9 and 2/4 through 3/8 form port group pic2. An LED labeled OK/
FAIL on the MIC indicates the status of the MIC. See
Switch
. See Figure 32 on page
Figure 32: EX9200-40T-MIC
Link/Activity LED for the ports
1
—
Status LED the ports
2
—
RJ-45 ports
3
—
• Cover panels—Two cover panels that cover the MIC slots.
. The MIC is shipped with 20 dust covers for the 20
93.
3
—
4
—
93.
4
—
5
—
MIC LED
MIC power button
Modular Interface Card LED in an EX9200
MIC power button
MIC LED
93
Modular