Juniper EX9214 Hardware Manual page 77

Table 23: LEDs on the EX9200-RE2 Routing Engine Module
LED Label
OK/FAIL
DISK1
DISK2
SEE ALSO
Installing an RE Module in an EX9200 Switch
Removing an RE Module from an EX9200 Switch
Status
Green
Red
Green
Green
(Continued)
State and Description
When the RE module is powering on:
•
Blinking slowly (LED is lit for a period of time and is
unlit for thrice that period of time that follows, and
this pattern is repeated)—RE module is coming online.
•
Blinking fast (LED is lit for a period of time and is unlit
for the subsequent same period of time, and this
pattern is repeated)—Linux is booted.
•
On steadily (LED glows steadily)—Junos OS is booted.
When the RE module is powering off:
•
Blinking fast (LED is lit for a period of time and is unlit
for the subsequent same period of time, and this
pattern is repeated)—Junos OS is powering off.
•
Blinking slowly (LED is lit for a period of time and is
unlit for thrice that period of time that follows, and
this pattern is repeated)—Linux is powering off.
•
Unlit—RE module is powered off.
RE module has failed.
Blinking—Indicates activity on the SSD.
Blinking—Indicates activity on the SSD.
66