Juniper EX9214 Hardware Manual page 37

Table 6: FRUs in an EX9200 Switch
FRU
Power supplies
Fan tray and air filter
Routing Engine module (RE module)
Switch Fabric module (SF module)
Line cards
Type
Hot-insertable and hot-removable.
Hot-insertable and hot-removable.
Redundant configuration:
•
Primary RE module is hot-pluggable.
•
Backup RE module is hot-insertable and hot-removable.
Base configuration:
•
You must disable the switch before removing any RE
Taking the Host Subsystem Offline in an
module. See
EX9200 Switch
.
See EX9204 Switch Configurations
Configurations
, and "EX9214 Switch Configurations" on page
9.
Redundant configuration:
•
Primary SF module is hot-pluggable.
•
Backup SF module is hot-insertable and hot-removable.
Base configuration:
•
You must disable the switch before removing any SF
Taking the Host Subsystem Offline in an
module. See
EX9200 Switch
.
EX9204 Switch Configurations
See
Configurations
, and "EX9214 Switch Configurations" on page
9.
Hot-insertable and hot-removable. We recommend that you
take the line cards offline before removing them. See
a Line Card from an EX9200 Switch
, EX9208 Switch
EX9208 Switch
,
Removing
.
26