Juniper EX9214 Hardware Manual page 96

See Figure 26 on page 85
Figure 26: EX9200-2C-8XS Line Card
1 Ejector levers
—
2 Line card LED
—
3 LEDs for the 10-Gigabit Ethernet ports
—
You can use the
show version
the switch.
Line Card Components
The EX9200-2C-8XS line card has:
• Two 100-Gigabit Ethernet ports, each of which can house CFP transceivers. These ports support
100GBASE-LR4 and 100GBASE-SR10 transceivers.
• Eight 10-Gigabit Ethernet ports, each of which can house SFP+ transceivers. These ports support
10GBASE-SR, 10GBASE-LR, 10GBASE-ER, and 10GBASE-ZR transceivers.
• Two dust covers for the two 100-Gigabit Ethernet ports and eight dust covers for the eight 10-
Gigabit Ethernet ports
• Line card LED—An LED labeled OK/FAIL, which indicates the status of the line card. See
LED in an EX9200 Switch
• LEDs for the ports—One LED on each port, the Link/Activity LED, which indicates the link status and
activity on the port. See
The ports are divided into two port groups. The four 10-Gigabit Ethernet ports labeled 0/0 through 0/3
and the 100-Gigabit Ethernet port labeled 1/0 form one port group. The four 10-Gigabit Ethernet ports
labeled 2/0 through 2/3 and the 100-Gigabit Ethernet port labeled 3/0 form the other port group. The
ports in each group share 130 gigabits of bandwidth. Thus, you can transmit up to 130 gigabits of traffic
through a port group, without packet drop.
command to see the version of Junos OS for EX Series switches loaded on
.
Network Port LEDs on Line Cards in an EX9200 Switch
4 100-Gigabit Ethernet ports
—
5 LEDs for the 100-Gigabit Ethernet ports
—
6 10-Gigabit Ethernet ports
—
Line Card
.
85