Juniper EX9214 Hardware Manual page 126

2. To indicate the speed at which the ports operate, configure the speed statement for specific ports. The
available options are 10g, 40g, and 100g.
fpc-slot pic pic-number ]
[edit chassis fpc
user@host# set port
For example:
[edit chassis fpc 4 pic 0]
user@host# set port 0 speed 10g
user@host# set port 1 speed 10g
user@host# set port 2 speed 100g
user@host# set port 3 speed 40g
NOTE: All the six ports of PIC 0 and PIC 1 of an EX9200-12QS support 10-Gbps and 40-
Gbps port speeds. However, only ports 2 and 5 of both the PICs support 100-Gbps speed.
3. Verify the configuration.
[edit chassis fpc 4 pic 0]
user@host# show
port 0 {
speed 10g;
}
port 1 {
speed 10g;
}
port 2 {
speed 100g;
}
port 3 {
speed 40g;
}
4. Commit your configuration changes.
5. Reset the PIC.
port-number speed (10g | 40g | 100g)
115