Juniper EX9214 Hardware Manual page 113

Line Card Components | 103
The line cards in EX9200 switches provide packet forwarding services. They are field-replaceable units
(FRUs) that you can install in the line card slots on the front of the switch chassis. Line cards are hot-
insertable and hot-removable: You can remove and replace them without powering off the switch or
disrupting switch functions.
Line Card Models
Table 35 on page 102 shows the model number, description of the line card model, and the Junos OS
release in which the line card was first supported.
Table 35: EX9200-40T Line Card
Model Description
EX9200-40T A line card with 40 RJ-45 ports that support RJ-45 connectors
See Figure 36 on page 102.
Figure 36: EX9200-40T Line Card
1 Ejector lever
—
Line card LED
2
—
3 MIC LED
—
You can use the
show version
the switch.
4
5
command to see the version of Junos OS for EX Series switches loaded on
Junos OS Release Required
12.3R2 or later
LEDs for the ports
—
RJ-45 ports
—
102