Disposal; Annex; Reflex Customer Service; Conformity And Standards - Reflex Anybus CompactCom Original Operating Manual

Disposal

Configure the port using Windows Device Manager:
If no data is received, check that the correct port has been configured.
1. Click on the Windows icon on your computer.
2. Enter "Device Manager".
3. Open Device Manager.
4. Ports (COM & LPT) lists the port that must be entered in step 1 of the ComTest Pro software.
5. Also check the connections!
DANGER
Risk of serious injury or death due to electric shock
Some parts of the device's circuit board may still carry 230 V voltage even with the device physically isolated from the power supply.
• Before you remove the covers, completely isolate the device controller from the power supply.
• Verify that the main circuit board is voltage-free.
10 Disposal
Dispose of the product at the end its useful life in a waste stream
separate from unsorted household waste.
Take the product to a suitable disposal point for recycling electrical
and electronic equipment.
Observe the laws applicable in your country on waste recycling and
disposal.
11

Annex

11.1

Reflex Customer Service

Central customer service
Central telephone number: +49 (0)2382 7069 - 0
Customer Service extension: +49 (0)2382 7069 - 9505
Fax: +49 (0)2382 7069 - 9523
E-mail: service@reflex.de
Technical Hotline
For questions about our products
Telephone number: +49 (0)2382 7069-9546
Monday to Friday 8:00 to 16:30
inhalt_en
30 — English Anybus® - CompactCom / Modbus-RTU® — 08.11.2022 - Rev. B
11.2

Conformity and standards

Device conformity declarations are available on the Reflex homepage.
www.reflex-winkelmann.com/konformitaetserklaerungen
Alternatively, scan the QR code:
11.3

Guarantee

The respective statutory guarantee regulations apply.