Page 1
Reflex Fillset Original operating manual...
Page 3
Information concerning the operating manual ........4 Safety ......................4 Overview ....................4 Technical data ..................5 Installation ....................5 Commissioning and maintenance ............7 Appendix ....................7 Reflex Customer Service................ 7 Warranty ....................7 English 05-2021 Contents Fillset — 05-2021 English — 3...
Page 4
Information concerning the operating manual This operating manual is an important aid for ensuring the safe and reliable functioning of the Fillset. Reflex Winkelmann GmbH accepts no liability for any damage resulting from failure to observe the information in this operating manual.
Page 5
7. Manual make-up If the Fillset is used for manual make-up or for filling the system, the shut-off must be slowly manually opened or closed as necessary. The system pressure is to be monitored at the site-provided pressure gauge.
Page 6
Variomat or Servitec, the shut-off is continuously open during operation. In the case of a Fillset with a contact water meter, it is cabled with the building control system or Reflex Fillcontrol, Servitec, Variomat, Reflexomat or Gigamat (see corresponding operating manual). Then the make-up quantity is evaluated via the corresponding control.
Page 7
Use the connections provided for ball valves and a suitable pressure gauge to perform a function test of the valve. Cleaning of dirt trap and BA cartridge • Disconnect the system and mains water lines upstream and downstream of the Reflex Fillset with the aid of inlet and outlet shut-offs and depressurise the valve. •...
Need help?
Do you have a question about the Fillset and is the answer not in the manual?
Questions and answers