Autoanswer - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

autoanswer

Sets or gets the Auto Answer Point-to-Point Video mode, which determines how the system handles an
incoming call in a point-to-point video conference.
Syntax
autoanswer <get|yes|no|donotdisturb>
Parameter
yes
no
donotdisturb
get
Feedback Examples
● autoanswer yes
returns
autoanswer yes
● autoanswer no
returns
autoanswer no
● autoanswer get
returns
autoanswer no
● autoanswer donotdisturb
returns
autoanswer donotdisturb
Comments
If autoanswer is set to no or donotdisturb, you must rely on API session notifications to answer
inbound calls.
Polycom, Inc.
Description
Allows any incoming video call to be connected
automatically. This is the default setting.
Prompts the user to answer incoming video calls.
Notifies the user of incoming calls, but does not connect
the call. The site that placed the call receives a Far Site
Busy (H.320) or Call Rejected (H.323) code.
Returns the current setting.
System Commands
144