Ntpserver - Polycom RealPresence Group Series Reference Manual

ntpserver

Sets the NTP server to use for time settings when the time server is set to manual.
Syntax
ntpserver get
ntpserver set <"xxx.xxx.xxx.xxx"|server name">
Parameter Description
Returns the current setting.
get
Sets the IP address of the NTP server using
set
the specified IP address or DNS name.
Feedback Examples
● ntpserver get
returns
ntpserver 192.168.1.205
● ntpserver set
returns
ntpserver <empty>
● ntpserver set 192.168.1.205
returns
ntpserver 192.168.1.205
Limitations
None
Comments
You must first set the ntpmode command to manual before using the ntpserver command.
Polycom, Inc.
System Commands
User
Accessible Additional Restrictions
302