Ipdialspeed - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

ipdialspeed

Sets or gets the valid IP dialing speed, and enables or disables the specified speed.
Syntax
ipdialspeed get "valid speed"
ipdialspeed set "valid speed" <on|off>
Parameter
get
"valid speed"
set
on
off
Feedback Examples
● ipdialspeed set 168 on
returns
ipdialspeed set 168 on
● ipdialspeed set 168 off
returns
ipdialspeed set 168 off
● ipdialspeed get 168
returns
ipdialspeed 168 off
Comments
The Polycom HDX system does not support separate settings for IP and ISDN dialing speeds.When you
change a setting using this command, the settings associated with the
page 318 also change, and vice versa.
User interface screen location: System > Admin Settings > Network > Call Preference (page 3):
Preferred Speeds
Polycom, Inc.
Description
Returns the current setting. The parameter "valid
speed" is required.
Valid speeds are: 56, 64, 2x56, 112, 2x64, 128, 168,
192, 224, 256, 280, 320, 336, 384, 392, 7x64, 504, 512,
560, 576, 616, 640, 672, 704, 728, 768, 784, 832, 840,
14x64, 952, 960, 1008, 1024, 1064, 1088, 1120, 1152,
1176, 1216, 1232, 1280, 1288, 21x64, 1400, 1408,
1456, 1472, 1512, 1536, 1568, 1600, 1624, 1664, 1680,
1728, 1792, 1856, 1920, 1960, 1984, 2016, 2048, 2304,
2560, 2816, 3072, 3328, 3584, 3840, and 4096 kbps.
Sets the IP dialing speed. The parameters "valid
speed" and on or off are required.
Enables the specified speed.
Disables the specified speed.
System Commands
isdndialspeed command on
306