Irf Auto-Update Enable - H3C S5500-EI Series Irf Command Reference

Slaves 6 and 7 are performing real time backup
Table 1-4 display switchover state command output description for the master
Master HA State to Slot slot-id
Data smooth
# Display the master/slave switchover state of slave 6.
<Sysname> display switchover state slot 6
Slave HA State: Receiving realtime data.
The above information indicates that slave 6 is receiving real time backup data.
Table 1-5 display switchover state command output description for a slave
Field
Slave HA State
Waiting

irf auto-update enable

Syntax
irf auto-update enable
undo irf auto-update enable
View
System view
Default Level
3: Manage level
Parameters
None
Description
Use the irf auto-update enable command to enable the auto update of boot files for an IRF virtual
device.
Use the undo irf auto-update enable command to disable this function.
This function is enabled by default.
Note the following:
Before adding a device into an IRF virtual device, ensure that the device and the master have the
same software version
After loading the master's boot file automatically, a slave configures the file as the boot file for the
next boot and reboots automatically.
Field
Indicates that this output information is generated by the master.
Describes the master/slave switchover states between the master and
the slave whose slot-id represents its member ID.
The master and the slave are smoothing data.
Indicates that this output information is generated by a slave.
Describes the master/slave switchover state of the slave.
The slave is ready, and is waiting to enter the batch backup state.
Description
Description
1-6