Table Of Contents; Chargestorm® Connected; Product Description; Intended Use - CTEK CHARGESTORM CONNECTED 2 User Manual

Content
CHARGESTORM® CONNECTED ..............................................2
Product description ..............................................................2
Intended use ............................................................................2
In the box ........................................................................................2
Overview .........................................................................................3
Status symbols .......................................................................3
To charge the vehicle .................................................................4
Open access & RFID access ..............................................4
To connect CHARGESTORM® CONNECTED
to the vehicle ...........................................................................4
To start charging with open access ................................4
To start charging with RFID access ................................4
Installation ....................................................................................5
Introduction ..............................................................................5
Safety .........................................................................................5
Optional equipment ...............................................................5
To check before installation ...............................................5
To prepare the location for installation ..........................5
To install the charging station on a wall ........................5
To install the charging station on a pole .......................6
To do the cable installation ................................................6
To install the power cable ...................................................6
To install the network cable and the 4G-modem
(optional) ...................................................................................7
To finish the installation ......................................................7
To change the configuration settings ........................... 8
To do a installation tests .....................................................9
To do maintenance tests ....................................................9
To recycle the product .........................................................9
2
Technical data ............................................................................10
Overcurrent and short-circuit protection ...................10
Part specific data .................................................................10
CTEK warranty statement ...................................................... 11
Limited warranty ................................................................... 11
Circumstances that will void the limited warranty ... 11
Additional information......................................................... 11
National usage restrictions .............................................. 11
Copyright ....................................................................................... 11
Revisions .................................................................................. 11
Abbreviations .............................................................................. 11
Electrical schematics ............................................................... 11

CHARGESTORM® CONNECTED

Product description

CHARGESTORM® CONNECTED is a multi usage station for electrical vehicles.
1 2
The charging station comes in several variants, such as for different output
power levels, number of outlets and type of outlets
hardwired Type 2 plug, 3 - Type 2 socket with shutter). For a complete list of
article numbers, download datasheet at www.ctek.com.
NOTE: Refer to the top of the charging station for model information.
CHARGESTORM® CONNECTED 2 is an improved and updated version of our
advanced EV charger with a range of functions and built in safety features. It
has a powerful charge controller, which can handle dual type 2 outlets/charging
cables and offers load balancing support through NANOGRID™.
Overheating protection
At high temperatures the charging station's algorithm will determine the optional
current. This reduces the risk of overheating and damaging the charging station
without preventing the use of the device.
User & installation instructions

Intended use

This charging station is intended for wall-mounted or pole-mounted use.
The charging station is intended for both restricted and non-restricted locations.

In the box

1. The charging station CHARGESTORM® CONNECTED 2.
Two keys.
2.
3. User and installation instructions.
4. Cover for cable inlet and cable glands (M25 and M12).
5. Holder for charging connector (for variants with fixed cable).
6. Insulation tube.
7. Five ST6.3 mounting screws.
8. Four rubber gaskets.
9. Five washers.
3
10. Two jumpers (2-way & 3-way for variants with one phase).
11. Wall bracket.
(1 - Type 2 socket, 2 -
12. Station bracket
13. Two push-clips
14. Two ST4 screws for push-clips
15. Two wall-mounting spacers
16. Drilling template
5
1
16
2
3
11
15 13
6
4 8
14
12
10
7 9
CTEK AB