Advertisement
Quick Links
MANUAL
CONGRATULATIONS
to the purchase of your new professional switch mode battery charger. This charger is
included in a series of professional chargers from CTEK SWEDEN AB and represents the
latest technology in battery charging.
SUPPLY PLUG*
CTEK COMFORT CONNECT
CHARGE CABLE
CTEK COMFORT CONNECT – eyelet M6
* Supply plugs may differ to suit your wall socket.
MAINS CABLE
CTEK COMFORT CONNECT – clamp
HOW TO CHARGE
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The power lamp will indicate that the mains
cable is connected to the wall socket. The error lamp will indicate if the battery clamps
are incorrectly connected. The reverse polarity protection will ensure that the battery or
charger will not be damaged.
3. Press the MODE-button to select charging program.
SMALL BATTERY PROGRAM
Continue to press the MODE-button to combine charging program with charging options.
AGM
AGM OPTION
Press the MODE-button several times until the desired combination of charging program and
options are lit.
4. Follow the 8-step display through the charging process.
The battery is ready to start the engine when STEP 4 is lit.
The battery is fully charged when STEP 7 is lit.
5. Stop charging at any time by disconnecting the mains cable from the wall socket.
READY TO USE
MODE BUTTON
ERROR LAMP
MODE
POWER LAMP
SMALL
NORMAL
BATTERY
BATTERY
PROGRAM
PROGRAM
NORMAL BATTERY PROGRAM
RECOND OPTION
FULLY CHARGED
AGM
RECOND
AGM
RECOND
OPTION
OPTION
MX
12
EN • 3
Advertisement
Related Manuals for CTEK battery charger
Summary of Contents for CTEK battery charger
- Page 1 MANUAL CONGRATULATIONS HOW TO CHARGE to the purchase of your new professional switch mode battery charger. This charger is 1. Connect the charger to the battery. included in a series of professional chargers from CTEK SWEDEN AB and represents the 2.
-
Page 2: Charging Programs
CHARGING PROGRAMS ERROR LAMP Settings are made by pressing the MODE-button. After about two seconds the charger acti- If the error lamp is lit, check the following: vates the selected program. The selected program will be restarted next time the charger 1. - Page 3 CHARGING PROGRAMS AND OPTIONS COMBINATIONS DESULPHATION SOFT START BULK ABSORPTION ANALYSE RECOND FLOAT PULSE 15.8V 0.8A until 12.6V Increasing voltage to Declining current Checks if voltage 13.6V 12.7V–14.4V 14.4V. 0.8A 14.4V drops to 12V 0.8A 0.8–0.3A 15.8V 0.8A until 12.6V Increasing voltage to Declining current Checks if voltage...
- Page 4 STEP 1 DESULPHATION CONNECT AND DISCONNECT THE CHARGER TO A BATTERY Detects sulphated batteries. Pulsing current and voltage, removes sulphate from the lead INFO plates of the battery restoring the battery capacity. If the battery clamps are incor- STEP 2 SOFT START rectly connected, the reverse Tests if the battery can accept charge.
-
Page 5: Technical Specifications
**) The quality of the charging voltage and charging current is very important. A high cur- ensure that they can use the battery charger safely. Store and use the battery charger rent ripple heats up the battery which has an aging effect on the positive electrode. High out of the reach of children, and ensure that children cannot play with the charger. -
Page 6: Limited Warranty
This warranty is void US12/780968 pending US D575225 CTM 844303 if the battery charger has been opened, handled carelessly or repaired by anyone other EP1618643 US D580853 CTM 372715 than CTEK SWEDEN AB or its authorised representatives.