Jamming Scenario (Id=1898); Jamming Digital Output Control (Id=1899); Jamming Sensitivity (Id=1900); Jamming Timeout (Id=1901) - Teltonika FMA110 User Manual

8.6.10 Jamming scenario (ID=1898)

This parameter enables/disables Jamming scenario. 0 – disable, 1 – enable.
Minimum Maximum
value value
0 1

8.6.11 Jamming digital output control (ID=1899)

This parameter defines digital output control on Jamming scenario. 0 – disable, 1 – DOUT1,
2 – DOUT2.
Minimum Maximum
value value
0 2

8.6.12 Jamming sensitivity (ID=1900)

This parameter defines Jamming sensitivity. 0 – low sensitivity (50 RSSI), 1 – medium
sensitivity (30 RSSI), 2 – high sensitivity (10 RSSI).
Minimum Maximum
value value
0 3

8.6.13 Jamming Timeout (ID=1901)

This parameter represents DOUT turning on timeout when jamming is detected.
Minimum Maximum
value value
0 65535

8.6.14 Jamming Pulse duration (ID=1902)

This parameter defines the Jamming Pulse duration after which DOUT is turned on.
Minimum Maximum
value value
0 65535

8.6.15 Immobilizer scenario (ID=1903)

This parameter lets enable/disable Immobilizer scenario. 0 – disable, 1 – enable.
Minimum Maximum
value value
0 1
Recommended Goes with (depends on)
value
-
Recommended Goes with (depends on)
value
-
Jamming scenario (ID=1899)
Recommended Goes with (depends on)
value
-
Jamming scenario (ID=1899)
Recommended Goes with (depends on)
value
Jamming scenario (ID=1899)
60
Jamming digital output control
(ID=1899)
Recommended Goes with (depends on)
value
Jamming scenario (ID=1899)
0
Jamming digital output control
(ID=1899)
Recommended Goes with (depends on)
value
-
parameters
parameters
parameters
parameters
parameters
parameters
Value
type
U8
Value
type
U8
Value
type
U8
Value
type
U16
Value
type
U16
Value
type
U8
78