Table of Contents
Advertisement
6.1.16 readops #
Send from device Operator List.
1 – send first 20 operator codes, 2 – send from 21
other operator codes.
6.1.17 flush #,#,#,#,#,#,#
Initiates all data sending by GPRS to specified target server. Comma separated parameters
go as numbered:
1.# - IMEI
2.# - APN
3.# - GPRS LOGIN
4.# - GPRS PASSWORD
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP)
Parameters are separated by comma (no spaces needed). In case you don't need to enter
parameter (Login/Pass) – do not put space, simply put comma and write next parameter.
Example: opa opa flush 353976012555151,banga,,,212.47.99.62,12050,0
Response details
FLUSH SMS Accepted
# records found on FLASH
Minimum Records to Send: #
GPRS Enabled: #
Time Sync: #
Example: FLUSH SMS Accepted. 11 records found on FLASH. Minimum Records to Send: 1.
GPRS Enabled: 1. Time Sync: 1.
6.1.18 sn #
Enables or disables Static navigation. 1 – enable, 0 – disable.
6.1.19 banlist
Gives a list of all banned operators.
Example when no operators are banned: 0000.00s.0.000
6.1.20 crashlog
Gives the last information before the device has crashed for unexpected reasons. It is
useful when the device acts unexpectedly or restars for unexplained reasons.
Example if no unexpected reset: "Crash: "
Example if unexpected reset was detected: "Crash: 3051,3052,3053".
Description
FLUSH SMS Accepted
Number of records found on FLASH
Number of minimum saved records to send
State of the GPRS connection, 0 – disabled; 1 – enabled
Indicates time synchronization on the device, 0 – not
synchronized; 1 – synchronized
st
to 40
th
operator codes, 3 – send all
58
Advertisement
Table of Contents
