Pinout Table 1 FMC130 2x6 socket pinout PIN NUMBER PIN NAME DESCRIPTION VCC (10-30) V DC (+) Power supply (10-30 V DC). Digital output, channel 3. Open collector DOUT 3 output. Max. 0,5 A DC. Analog input, channel 2. Input range: 0- DIN 3 / AIN 2 30 V DC / Digital input, channel 3.
Set up your device How to insert Micro-SIM card and connect the battery 1. Gently remove FMC130 bottom cover using plastic pry tool from both sides. Then remove the top cover. 2. Insert Micro-SIM card as shown with PIN request disabled or...
Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup. 1. Power-up FMC130 with DC voltage (10 – 30 V) power supply Configuration (Windows) using supplied power cable. LED’s should start blinking, see “LED indications”.
GPRS settings can be configured and Data Acquisition – where data acquiring parameters can be configured. More details about FMC130 configuration using Configurator can be found in our Wiki. Quick SMS configuration Figure 10 Configurator Status window FMC130 | Wiki...
Page 9
• server every 120 seconds 2005 – Port • After successful SMS configuration, FMC130 device will synchronize 2006 – Data sending protocol (0 • time and update records to configured server. Time intervals and – TCP, 1 – UDP) default I/O elements can be changed by using...
▬ When the module is connected, measure the voltage again to make sure it did not decrease. ▬ It is recommended to connect to the main power cable in the fuse box. ▬ 3 A, 125 V external fuse shall be used. FMC130 | Wiki...
LED indications Basic characteristics Table 5 Basic characteristics MODULE Quectel EC21-AU, Quectel EC21-EC, Teltonika Name TM2500 Table 3 Navigation LED indications LTE(CaT1)/3G(UMTS/HSPA)/2G(GSM/GPRS)/GNSS/ Technology BLUETOOTH BEHAVIOUR MEANING GNSS GNSS GPS, GLONASS, GALILEO, BEIDOU, QZSS, AGPS Permanently switched on GNSS signal is not received...
TYP. MAX. UNIT battery) Operating humidity 5% to 95% non-condensing SUPPLY VOLTAGE Ingress Protection Rating IP41 Supply Voltage (Recommended Operating Battery charge temperature 0 °C to +45 °C Conditions) Battery discharge temperature -20 °C to +60 °C FMC130 | Wiki...
Page 13
Additional error on 12 V, Range 1 Measurement error on 30 V, Range 1 0.33 Additional error on 30 V, Range 1 Input Voltage (Recommended Operating Conditions), Range 2 Input resistance, Range 2 kΩ Measurement error on 12 V, Range 2 FMC130 | Wiki...
All related devices instructions. must meet the requirements of EN 60950-1 standard. The device FMC130 is not designed as a navigational device for boats. Battery should not be disposed of with general household waste. Bring damaged or worn-out batteries to your local Do not disassemble the device.
• FMC130 E-Mark • FMC130 RoHS • FMC130 Declaration of device operation temperature • This sign on the package means that it is necessary to read the User‘s Manual before your start using the device. Full User‘s Manual version can be found in our Wiki.
More information can be found at teltonika.lt/warranty-repair • Repaired • Replaced with a new product • Replaced with an equivalent repaired product fulfilling the same functionality • TELTONIKA can also repair products that are out of warranty at an agreed cost. FMC130 | Wiki...
Need help?
Do you have a question about the FMC130 and is the answer not in the manual?
Questions and answers