Setkey; Delkey; Dtcinfo - Teltonika FMA110 User Manual

Table of Contents

Fault codes are written in international format, so it is easy to decript it.

A few links which help to decript DTC error codes:

http://www.totalcardiagnostics.com/support/Knowledgebase/Article/View/21/0/generic

manufacturer-obd2-codes-and-their-meanings

http://www.engine-codes.com/

http://www.obd-codes.com/trouble_codes/

6.1.25 setkey

Changes device current configuration keyword.

Example: opa opa setkey 0101 3333

Here 0101 is an old keyword, 3333 is a new keyword.

If the keyword was not set, new keayword can be set using the same command.

Example: opa opa setkey 3333

Here 3333 is a new keyword.

Deletes device current configuration keyword.

Command dtcinfo gives DTC information

"DTC information" possible answers:

- Ignition is off (DTC reading is not possible);

- DTC not supported by the program/compilation;

- Communication error;

- Communication error –diagnostic computer connected;

- Communication error –engine is working;

Module detects # DTC error codes (# -Number of DTC codes)

Table of Contents