Getstatus - Teltonika FMA110 User Manual

# - ID value.
setparam # # Set parameter value according entered ID and Value.
1.# - ID value.
2.# - New Parameter Value
getparam 1271 X X values can be 1,2,3.
flush #,#,#,#,#,#,# Initiates all data sending to specified target server
1.# - IMEI
2.# - APN
3.# - LOGIN
4.# - PASS
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP)
readops # 1 – send first 20 operator codes, 2 – send from 21
operator codes, 3 – send all other operator codes
sn # Static navigation, 1 – enable, 0 – disable
banlist Banned operators information
crashlog Device last information before unexpected reset
delete_all_sms Deletes all SMS
lvcangetprog CAN Program Number request by SMS
lvcansetprog # Set LVCAN program number
lvcangetinfo Get LV-CAN info by SMS
getcontsens Get IDs of connected temperature sensors
faultcodes Read DTC
setkey # # Set a new configuration keyword
1. # - Old Keyword
2. # - New Keyword
delkey # Delete configuration keyword
dtcinfo DTC information
6.1.1

getstatus

Response details
Data Link Indicate module connection to server at the moment: 0 – Not
connected, 1 – connected
GPRS Indicate if GPRS is available at the moment
Phone Voice Call status: 0 – ready, 1 – unavailable, 2 – unknown, 3 –
ringing, 4 – call in progress, 5 – asleep
SIM SIM Status: 0-ready, 1-pin, 2-puk, 3-pin2, 4-puk2
OP Connected to GSM Operator: numerical id of operator
Signal GSM Signal Quality [0-5]
NewSMS Indicate if new message received
Roaming 0 – Home Network, 1 – roaming
SMSFull SMS storage is full? 0 – ok, 1 – SMS storage full
LAC GSM Tower Location Area Code
Cell ID GSM Tower Cell ID Code
Description
Yes
Yes
No
st to 40 th
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
54