Firmware; Updating Firmware Using Usb Cable - Teltonika FMA110 User Manual

Table of Contents

4 FIRMWARE

4.1

FMA110 functionality is always improving, new firmware versions are developed. Current

module firmware version can be retrieved from Configurator.

Connect FMA110 to PC with the USB cable. Launch "Firmware Updater", select COM port

to which device is connected, click connect, and when IMEI and Firmware version fields are filled,

start the update. Device needs some time to send IMEI and Firmware version, so do not be afraid

if IMEI will not show up immediately, disconnect and after 1-2 minutes try to connect again.

When starting update device will open link with updater. With link open device downloads

firmware and starts installing. Wait thru all these screens as in Figure 16 for firmware to update.

Update process may take up to several minutes.

Figure 15 FMA110 firmware updater screen

Table of Contents