Gsm Settings, Operator List - Teltonika FMA110 User Manual

5.12 GSM settings, Operator list

Operators list – FMA110 can work in different modes (use different settings) according to
the operator list defined. Operator list is used for Data Acquisition Mode switching (see chapter
5.13 Data Acquisition Mode settings for more details). Modes are changed based on GSM
operator FMA110 is connected to.
If operator list is left empty, it will allow using GPRS to any GSM operator. Please note that
FMA110 will work in Unknown mode only (make sure it is configured to allow data sending –
GPRS context is enabled).
Operator Blacklist. Operator BlackList Functionality algorithm:
Device tries to connect to an operator with the strongest signal. It will prioritize operators which
are specified in the operator list. If no operators from the operator list are available, the device
will try to connect to an operator from the blacklist. If the device connects to an operator from
the blacklist, it will not be allowed to connect to the internet or send SMS messages. If no
suitable operator is found on both lists, the device will try to connect to a remaining available
operator with the strongest signal. The brief functionality is shown in diagram below:
Figure 23 Operator list configuration
33