Table of Contents
Advertisement
trip, FMA110 remembers new iButton ID. FMA110 forgets iButton ID after ignition is off and trip
ignition off timeout is reached.
5.14.3 Geofencing settings
FMA110 has 5 configurable Geofence zones and it can generate an event when defined
Geofence zone border is crossed.
Frame border – frame border is an additional border around Geofence zone. It is additional
area around defined zone used to prevent false event recording when object stops on the border
of the area and because of GPS errors some records are made inside area and some – outside.
Event is generated only when both borders are crossed. See figure 31 for details: track 1 is
considered to have entered the area while track 2 is not.
Shape – can be rectangle or circle
Priority – priority of Geofence event: low, high or panic. These levels define priority of
event information sending to server. See I/O element description for more details about
priorities.
Generate event (On entrance, On exit, On Both) – choose when record will be generated;
X1 – geofence zone left bottom corner X coordinate (longitude);
Y1 – geofence zone left bottom corner Y coordinate (latitude);
Figure 37 Remember iButton parameter in configurator
Figure 36 Geofence border
42
Advertisement
Table of Contents
