Table of Contents
Advertisement
9.3
SIMPLE-CAN - contactless CAN-BUS reader
SIMPLE-CAN is contactless adapter used to read vehicle CAN data with LV-CAN200, ALL-
CAN300. If LV-CAN200 or ALL-CAN300 connection requires two CAN lines to get all data, then
you need two SIMPLE-CAN readers
TECHNICAL DETAILS
Power supply voltage 9-63 V
Power supply current:
Mode
Active
Standby
CAN-BUS speeds from 33,33 to 500 kb/s
Automatically sets CAN Low, CAN High polarity
Automatically adjusts signal level and speed
SIMPLE-CAN works in the listening mode only, so not all the data available on the CAN-BUS
may be received using this solution. The device automatically sets CAN L/H polarity, but the
calibration has to be always executed during installation process. Connection of previously
calibrated unit to another car needs new calibration because the reader automatically adjusts
signal level and speed to different CAN-BUSes. The device also automatically adapts to the
found noise level.
Figure 54 Adapter signaling led
12V
24V
8.3 mA
4.3 mA
1.6 mA
0.91 mA
95
Advertisement
Table of Contents
