Table of Contents
Advertisement
61
Security state flags
chasis
0x10
drive cylinders
0x20
0x40
0x80
Byte3:
0x01
is in idle position
0x02
0x04
0x08
0x10
0x20
Byte4:
0x02
0x04
0x08
0x10
0x20
0x40
0x80
Byte5:
0x01
0x02
0x04
0x08
0x10
0x20
0x40
Byte6:
0x01
0x02
0x04
0x08
0x10
0x20
0x40
0x80
Byte7:
0x01
0x02
0x04
0x08
0x10
8
132
Byte0 (LSB):
Every two bits in this byte correspond to a different
CAN bus number.
00 – CAN not connected, connection not
required
01 – CAN connected, but currently module not
– Alarm oil temperature in hydraulic system of
– Alarm oil pressure in engine
– Alarm coolant level
– Overflow chamber of hydraulic unit
– Unloader drive is ON. Unloading tube pivot
– No operator!
– Straw walker is plugged
– Water in fuel
– Cleaning fan RPM
– Trashing drum RPM
– Low water level in the tank
– First rear hydraulic turned on
– Standalone engine working
– Right joystick moved right
– Right joystick moved left
– Right joystick moved front
– Right joystick moved back
– Brushes turned on
– Water supply turned on
– Vacuum cleaner
– Unloading from the hopper
– High Pressure washer (Karcher)
– Salt (sand) disperser ON
– Low salt (sand) level
– Second front hydraulic turned on
– Third front hydraulic turned on
– Fourth front hydraulic turned on
– Second rear hydraulic turned on
– Third rear hydraulic turned on
– Fourth rear hydraulic turned on
– Front three-point Hitch turned on
– Rear three-point Hitch turned on
– Left joystick moved right
– Left joystick moved left
– Left joystick moved front
– Left joystick moved back
– Front Power Take-Off turned on
105
Advertisement
Table of Contents
