Teltonika FMA110 User Manual page 30

GPS
Static Navigation Mode is a filter, which filters out track jumps when the object is stationary.
If Static navigation filter is disabled, it will apply no changes on GPS data. If Static navigation filter
is enabled, it will filter changes in GPS position if no movement is detected (depends on Object
Motion Detection Settings). It allows filtering GPS jumps when object is parked (is not moving)
and GPS position is still traced.
Also if Power Voltage is chosen as ignition source there is possibility to choose manual
ignition detection or automatic ignition detection. For manual ignition user has to choose power
voltage levels by himself. For automatic ignition FMA110 device detects system voltage and
automatically detects ignition. In 12 V systems ignition is on when voltage is between 13,2 – 16 V
and for 24 V systems ignition is detected when voltage is between 27 – 32 V.
GPS fix is available and vehicle
speed is lower than 5 km/h
While GPS fix is unavailable, Object Motion Detection Settings are
working like in Msensor mode
Figure 19 System settings configuration
GPS fix is available and vehicle
speed is higher than 5 km/h
30