Introduction; Attention; Instructions Of Safety - Teltonika FMA110 User Manual

1 INTRODUCTION

1.1

Attention

1.2

Instructions of safety

This chapter contains information on how to operate FMA110 safely. By following these
requirements and recommendations, you will avoid dangerous situations. You must read these
instructions carefully and follow them strictly before operating the device!
The device uses a 10 V...30 V DC power supply. The nominal voltage is 12 V DC. The
allowed range of voltage is 10 V...30 V DC.
To avoid mechanical damage, it is advised to transport the FMA110 device in an impact-
proof package. Before usage, the device should be placed so that its LED indicators are visible,
which show the status of operation the device is in.
When connecting the connection (2x5) cables to the vehicle, the appropriate jumpers of
the power supply of the vehicle should be disconnected.
Before dismounting the device from the vehicle, the 2x5 connection must be disconnected.
The device is designed to be mounted in a zone of limited access, which is inaccessible for
the operator. All related devices must meet the requirements of standard EN 60950-1.
Do not disassemble the device. If the device is
damaged, the power supply cables are not isolated or
the isolation is damaged, before unplugging the power
supply, do not touch the device.
All wireless data
interference that may affect other devices which are
placed nearby.
The device must be connected only by qualified
personnel.
The device must be firmly fastened in the predefined
location.
The programming must be performed using a second
class PC (with autonomic power supply).
The device is susceptible to water and humidity.
Any installation and/or handling during a lightning
storm are prohibited.
FMA110 has USB interface;
Please use cables provided with FMA110 device.
Teltonika is not responsible for any harm caused by
using wrong cables for PC <-> FMA110 connection.
transferring devices produce
7