Authorized Phone Numbers (Id=1260-1269); Sms Event Predefined Numbers (Id=150-159); Operator List (Id=1271 X); Black Operator List (Id= 1272 X) - Teltonika FMA110 User Manual

Table of Contents

Advertisement

8.4.13 Authorized phone numbers (ID=1260-1269)

If at least one number is entered then only those number can send messages to device.
Number must be entered without "+" or "00".
Example: 37060012346
Minimum
Maximum
value
value
1 digit
16 digits
If SMS data sending is enabled (ID=1260) first value in a list is server GSM number. The SMS with
24 coordinates is sent to this number.

8.4.14 SMS Event PreDefined Numbers (ID=150-159)

In this field are written GSM numbers, to which will be sent "Event SMS" text message.
Number must be entered without "+" or "00".
Example: 37060012346
Minimum
Maximum
value
value
1 digit
16 digits

8.4.15 Operator List (ID=1271 X)

Parameter defines operator list. According to this list module selects operating profile.
GSM operator codes are comma separated. First in a list is Home Operator Code, then Preferred
Roaming Operator Codes are written.
X defines starting position that is changed: If X is from 0 to 49, X means index of operator
code which has to be configured. Up to 20 operator codes may be configured in 1 SMS. Example:
setparam 1271 16 24602,24603,24605
Here 16
, 17
th
th
unchanged in the configuration.
Minimum
Maximum
value
value
Empty
7 digits

8.4.16 Black Operator list (ID= 1272 X)

Parameter defines the operator list. X defines the starting position that will be changed: If
X is between 0 and 49, X shows the index of the operator code from the blacklist (the operator
code has to be previously configured in the list). Up to 20 blacklist operator codes may be
configured in 1 SMS. Example: setparam 1272 16 24602,24603,24605.
Here 16
th
, 17
th
and 18
unchanged in the configuration.
Minimum
Maximum
value
value
Empty
7 digits
Recommended
value
-
Recommended
value
-
and 18
operator codes are set. Note! Other operator codes are left
th
Recommended
value
-
th
black operator codes are set. Note! Other operator codes are left
Recommended
value
-
Goes with (depends on)
parameters
Goes with (depends on)
parameters
Goes with (depends on)
parameters
Goes with (depends on)
parameters
Value
type
S8[17]
Value
type
S8[17]
Value
type
U32
Value
type
U32
68

Advertisement

Table of Contents
loading

Table of Contents