I/Osettings - Teltonika FMA110 User Manual

I/O events
FMA110 sends SMS event message when a configured I/O property enters and/or exits its
configured High/Low boundaries or Hysteresis event generation is chosen (Monitoring does not
generate event, so SMS event could not be configured). Every IO element SMS event can be
configured to send individual message to different numbers.
5.15 I/O settings
When no I/O element is enabled, AVL packet comes with GPS information only. After
enabling I/O element(s) AVL packet along with GPS information contains current value(s) of
enabled I/O element.
Nr. Property Name
1 Digital Input Status 1
2 Digital Input Status 2
3 Digital Input Status 3
4 Analog Input 1
5 GSM level
6 Speed
7 External Power Voltage
8 GPS Power
9 Dallas Temperature
10 iButton ID
11
Data Mode
12 Digital output 1 state
Figure 46 I/O SMS event configuration
Permanent I/O elements
(are always sent to server if enabled)
Bytes
1
1
1
2
1
2
2
States: 0 – GPS module is turned off, 2 –
working, but no fix, 3 – working with GPS
2
fix, 4 – GPS module is in sleep state, 5 –
antenna is short circuit.
4
Dallas error
8
1
roaming on stop, 3 – roaming on move, 4 –
unknown on stop, 5 – unknown on move
1
Description
Logic: 0 / 1
Logic: 0 / 1
Logic: 0 / 1
Voltage: Mv, 0 – 30 V
GSM signal level value in scale 1 – 5
Value in km/h, 0 – xxx km/h
Voltage: Mv, 0 – 30 V
10 * Degrees ( °C ), -55 - +115, if 3000 –
iButton ID number
0 – home on stop, 1 – home on move, 2 –
Logic: 0 / 1
49