Data Acquisition Modes Parameters; Home Network Gsm Operator Code "Vehicle On Stop" Parameters; Min Period (Id=1540); Min Saved Records (Id=1543) - Teltonika FMA110 User Manual

Table of Contents

Advertisement

8.5

Data Acquisition Modes parameters

8.5.1

Home Network GSM operator code "Vehicle on STOP" parameters

8.5.2

Min Period (ID=1540)

This parameter indicates time interval in seconds in order to acquire new record. If value is
0 it means no records by min period will be saved.
Minimum
Maximum
value
value
0
2592000
8.5.3

Min Saved Records (ID=1543)

This parameter defines minimum number of records in one data packet that can be sent to
server. It has higher priority than Data Send Period (ID=1544).
Minimum
Maximum
value
value
1
255
8.5.4

Send Period (ID=1544)

This parameter indicates frequency (time interval in seconds) of sending data to server.
Minimum
Maximum
value
value
0
2592000
8.5.5

GPRS Week Time (ID=1545)

This parameter manages when it is allowed to open GPRS context. When module starts it is
prohibited to open the context. When modem's GPRS context is closing (for example changing
network) it is allowed to open it only at a defined time. It is possible to allow connections every
10 minutes up to once per day.
Example value: 7F,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF
Schedule parameter format:
Time is defined as 19 byte array. First byte of array defines week days; the rest 18 bytes
define timestamps with 10 minute interval. In first byte, first bit (LSB) defines if module should
connect to GPRS (send SMS) on Monday, second bit – on Tuesday and so on up to seventh bit –
which means Sunday. Eighth bit (MSB) is not used. If bits value is 0 then device is not allowed to
open GPRS context, but if it is already open – does not close it. If value is 1 it will work as day
minutes are defined in rest of the bytes. Day's minutes are defined by 18 bytes (144 bits). Every
n
th
bit (beginning from the first bit (LSB) and ending 18 bytes 8
minute of the day (day has 1440 minutes).
Sample: GPRS will be allowed on Monday to Friday at 8:00 and 16:00 GMT. The following
value should be configured:
00011111 00000000 00000000 00000000 000000000 00000000 00000000 00000001 00000000 00000000
00000000 00000000 00000000 000000001 00000000 00000000 00000000 00000000 00000000
Red bits indicate that GPRS will be allowed every day except Saturdays and Sundays. Blue
bits indicate 480 and 720 minutes (480min = 8h and 720min = 16h). So the parameter value
should be:
1F,00,00,00,00,00,00,01,00,00,00,00,00,01,00,00,00,00,00
Recommended
value
-
Recommended
Goes with (depends on)
value
1
GPRS Week Time (ID=1545)
Recommended
value
Min Saved Records (ID=1543)
-
Goes with (depends on)
parameters
parameters
Goes with (depends on)
parameters
GPRS Week Time (ID=1545)
th
bit (MSB)) indicates every 10
Value
type
U32
Value
type
U8
Value
type
U32
th
69

Advertisement

Table of Contents
loading

Table of Contents