Deactivate By (Id=1100); Autogeofence Event Priority (Id=1103); Autogeofence Event Generating (Id=1104); Radius (Id=1105) - Teltonika FMA110 User Manual

8.6.28.3 Deactivate by (ID=1100)

Parameter defines Autogeofence deactivation source. Value 1 is dedicated for attached
iButton, value 0 – for Ignition.
Minimum Maximum
value value
0 1

8.6.28.4 AutoGeofence event Priority (ID=1103)

Parameter defines AutoGeofence event priority: 0 is low, 1 – high;
Minimum Maximum
value value
0 1

8.6.28.5 AutoGeofence event generating (ID=1104)

Generate event: 0 – no event, 1 – on entering zone; 2 – on exiting zone; 3 – on both;
Minimum Maximum
value value
0 3

8.6.28.6 Radius (ID=1105)

Parameter represents radius of circle with center device coordinates after activating
AutoGeofence feature.
Minimum Maximum
value value
0 1000000

8.6.29 iButton List (ID=3500-3999 )

Read 5.4.4.
Minimum Maximum
value value
FFFFFFFF
0
FFFFFFFF
Recommended Goes with (depends on)
value
Enable/Disable (ID=1101)
-
iButton List (ID=3500-3999 )
Recommended Goes with (depends on)
value
Enable/Disable (ID=1101)
1
AutoGeofence event generating
Recommended Goes with (depends on)
value
Enable/Disable (ID=1101)
2
AutoGeofence event Priority
Recommended Goes with (depends on)
value
Enable/Disable (ID=1101)
100
Recommended Goes with (depends on)
value
Immobilizer scenario (ID=1903)
-
iButtons list checking (ID=1905)
parameters
parameters
(ID=1104)
parameters
(ID=1103)
parameters
Deactivate by (ID=1100)
parameters
Value
type
U8
Value
type
U8
Value
type
U8
Value
type
U32
Value
type
U64
83